Description

The Dogtra YS300 is a very small and lightweight bark control collar which is designed for small to medium sized barking dogs and some large long/thick coat dogs. Special features include the "P" vibration warning before static correction. The Dogtra YS300 features industry-leading electronics, six variable intensity settings from low to mid-range, is fully rechargeable and completely waterproof (IPX 7). Key Features: Microphone Sensor The Dogtra YS300 Barking Collar uses the latest in Dogtra bark control technology with a "sound recognition and filtering microprocessor" which is able to distinguish a dogs' barking from its surrounding ambient noises. This intelligent bark collar is fitted with self-activating micro processing sound analysis technology, which only responds to the bark of your dog. Indicator Light (LED window) The indicator light (LED Window) will flash for 1 second when the Dogtra YS300 Bark Control collar has been turned on. Then after 2 seconds, it will flash every 2 seconds. If the collar has been on for over 10 seconds, it will automatically go into sleep mode and the LED light will turn off. Before going into Sleep mode, the LED light flashes green when the battery is fully charged and turns to amber when the battery life is getting low. When the LED indicator emits a blinking red light, the battery needs to be recharged. Stimulation The Dogtra YS300 anti barking collarhas 7 levels of static electronic stimulation and a vibration. The "P" level is vibration only mode. This can be effective for some small dogs and/or sensitive dogs as the vibration from the collar may be enough of a distraction to get their attention and stop them from barking. From levels 2 to 7, a warning vibration is first activated followed by a static stimulation (2 being the lowest, 7 the highest). The ability to manually select the level of correction makes the Dogtra YS300 bark collar ideal for a wider range of dogs compared to automatically-set units. This is due to the fact that you can start off on the lowest setting and, depending on the dog's reaction, increase the level until the right setting is found for your dog. ON-OFF & Intensity Dial Function OFF Power OFF P Vibration only (non-stimulation) 2-7 Vibration followed by stimulation T Test mode  Testing the Dogtra YS300 bark control collar : 1. Turn the Dogtra YS300 bark control collaron by turning the ON/OFF & Intensity Dial and select the test mode (T) so that the arrow on the dial is aligned with the letter “ T”. 2. Scratching the microphone sensor by using a coin or a hard metal object. The collar should emit a vibration three times. Repeat the same process if you want to test again. For more information on anti bark collars such as effectiveness, how they stop barking dogs etc, feel free to read our Stop Dog Barking FAQ. *Conditions apply. Please refer to our Termssection for further information. Please note: Dogmaster Trainers does not recommend that the customer leave the static correction collar on the dog for more than 8 hours per day as this may cause ‘pressure necrosis’. Please also check your dog’s neck for irritation and wash neck each time after using the collar and clean the contact probes with alcohol every week. Specifications: Height: 40mm Width: 53mm Thickness: 26mm Weight: 138 grams What's inside in the box: 1 x Dogtra YS300 Bark Control Collar 1 x A collar strap (fit max 50cm neck size) 1 x Dogtra 5V charger (AU standard) 1 x Instruction Manual 1 x Pair of standard Dogtra contact Probes (to fit most of dogs) 1 x Pair of plastic training probes (won't deliver static stimulation, for vibration training only)  Recommend Dog Breeds The Dogtra YS300 is a most popular collar for dogs from 7kgs and the correction range is su